Filter Results By:
Products
Applications
Manufacturers
Anechoic Enclosures
Enclosures that dampen rf or sound reflection within and stop exterior noise.
See Also: Enclosures, RF Enclosures, Shielded Enclosures, Anechoic Boxes
- Virginia Panel Corporation
product
Enclosure, G12, Front Mount, 4 Cable Clamps, 12" Depth
410112739
Enclosure, G12, Front Mount, 4 Cable Clamps, 12" Depth Includes hinged cover and 4 cable clamps for discrete wiring that provide secure strain relief. With cable clamps in open position- stiffener bar can be removed allowing installation or removal of cables without unplugging patchcords from assembly. Housing: Material = .06" Aluminum, Finish = Powder Coat BlackCover(s)/Access Panel(s): Material = .12" Aluminum, Finish = Black Anodize
-
product
Hand-In Type Electromagnetic Anechoic Box (Shield Box)
MY3720
Suitable for weak electric field resistance test, out-of-service test or digital forensics for smart phone, tablet terminal or mobile PC ! !DUT can be operated directly with bare hands while placing it in the box and looking at the inside from the shield window.
-
product
Antenna Testing Services
Our chamber measures 28' x 14' x 14' with 12" to 36" pyramidal anechoic absorbers and is fully shielded using a dual layer metal enclosure. Our test chamber is designed to for frequencies ranging from .700 to 6.00 GHz.
-
product
Hand-In Type Electromagnetic Anechoic Box (Shield Box)
MY3710HS
Higher shielding performance than MY371080dB. Suitable for weak electric field resistance test, out-of-service test or digital forensics for mobile phone, smart phone or tablet terminal! DUT can be operated directly with bare hands while placing it in the box and looking at the inside from the shield window.
-
product
Broadband Antenna
Vivaldi
The dbDIRECT Broadband Antenna features a broad frequency range of operation, high gain, small form factor and directional radiation pattern, making it highly attractive for widespread use in test and measurement of emerging wireless technology devices and radars. Contrary to conventional Vivaldi antennas limited to operating only at higher frequencies, the dbDIRECT Broadband Antenna design is optimized to operate at a frequency as low as 700 MHz up to 6 GHz. This lightweight and compact antenna design provides excellent matching over a broad frequency range.The antenna is designed to be placed in a DVTEST's portable anechoic chamber such as the dbSAFE enclosures for OTA (Over the Air) testing of DUTs. The antennas can be mounted in fixed positions to facilitate repeatable results. When used in conjunction with a rotary positioning mechanism, customers are able to detect the highest point of power sensitivity for enhanced accuracy and repeatability in measurements. In this configuration, both the antennas and DUTs can be positioned in order to facilitate the measurement.
-
product
Electromagnetic anechoic box/Shield box/Anechoic chamber
The necessity of a wireless system test has risen by the spread of recent wireless telecommunication equipment as shown in cellular phone, wireless LAN, RF-ID tag and ETC (Electronic Toll Collection system). It is necessary for a wireless test to be performed in anechoic environment in which an external noise is intercepted and a radio wave does not reflect internally. An anechoic chamber (room version of a shield box) is proper facilities but needs a wide space and a huge cost. Especially, the equipment under wireless system test on the production line can not radiate any signal radio wave outside before approval. The shield box satisfies these conditions.
-
product
Advanced Reconfigurable Modular OTA RF Test Enclosures, ≥100 DB Isolation, 300 MHz - 90 GHz
dbSAFE ARMOR
The dbSAFE ARMOR series of shielded boxes are cost-effective solutions for OTA testing in the mmWave spectrum. Providing a shielded, fully anechoic test environment, these RF test enclosures ensure stable and repeatable measurements over a wide frequency range (from 300 MHz to 90 GHz).
-
product
Anechoic Chambers
Eckel Noise Control Technologies
Anechoic Chambers are echo-free enclosures with a sound energy absorption level of 99% to 100%, or a reflected sound pressure level of 10% or less. The frequency at which the energy absorption drops below 99%, or the pressure reflection exceeds 10%, is known as the low-frequency cut-off. Sound absorption is obtained by lining the walls, ceilings, and floor with wedges or other sound absorbing elements or SuperSoft panels, depending on performance level required and cut-off desired.
-
product
Anechoic Chamber
Beijing KeHuan Century EMC Technology Co,.LTD
(7m × 4m × 3m) RF shielding EMC laboratory (anechoic chamber) is constructed by attaching ferrite tiles and microwave absorbing materials after the RF shielding room is built (7m × 4m × 3m) The simple 3m test distance EMC laboratory can perform EMC tests in the frequency range of 30MHz-18GHz.
-
product
Anechoic Chamber Filters
RF leakage through Ethernet and USB cables can destroy even the best RF enclosures and chambers. The need for filtering in the ever congested RF environment requires special filters that can pass USB 2.0 and 10/100/1000 Mbps Ethernet signals and filter out unwanted higher frequencies such as cellular and WiFi. The Adaura Technologies USB/Gigabit Filters provide one GigE and one USB 2.0 pass-through connections while filtering out other RF up to 8GHz. It has a small form factor to allow easy installation. It is a most cost effective solution for a clean chamber set up. In a typical chamber, WiFi signals are reduced to <-100dBm with this filter installed.
-
product
Extra-Rugged Enclosures
Fiber Lab 800HE
Fiber Lab 800HE from M2 Optics Inc. offers an extremely rugged testing platform for engineers and technicians working with fiber optic products and networks. Built to endure rough handling around the lab or travel, it can hold up to 30km of optical fiber with your choice of custom length.
-
product
Test Enclosures
The HV test hood, developed by us in accordance with EN50191 standard (erection and operation of fixed and temporary electrical test installations), is designed for testing large quantities in ongoing production. The ergonomic design ensures fatigue-free operation even during repetitive work sequences. Equipped with all safety-relevant functions, such as safety switch and locking of the hood cover during the test sequence, the operator is optimally protected at all times.The interchangeable adapter plate within the test cell allows quick adaptation for different test conditions and test situations.
-
product
Enclosures
VPC offers a variety of options to customize standard enclosures to meet any application need. Use VPC's Customer Wirelist Template to quickly communicate your overall requirements. VPC can provide options such as cutouts, secondary connectors, silk screening, engraving, and much more. Contact a Field Application Engineer for assistance designing a custom enclosure to meet your test needs.
-
product
Anechoic Chamber room for Automotive components
Anechoic Chamber room of most suitable Automotive devices EMI/EMS test of the method of ALSE, which meet the global standard like a 2004/104/EC, several emmission standard like a CISPR25 which automotive manufacturers in EU/USA refer to, Immunity standard like a ISO11452 and others for the Automotive devices.
-
product
Enclosure Accessory Kit, Gas Spring for Sloped Enclosure
410114133
The sloped enclosures come capable of having a Gas Spring accessory installed on the left, right or both sides of the enclosure. The enclosure comes standard with one Gas Spring accessory on the right side.
-
product
Environmental Enclosures
TSI’s DustTrak™ Environmental Enclosure models 8535 is designed to protect the standard DustTrak models (8530, 8533, 8530EP and 8533EP) when monitoring outdoors or in hazardous environments
-
product
Subrack Enclosures
IEC 60297
Beijing Rdekono Electronic Equipment Co.,Ltd.
As a professional 19-Inch Subrack Manufacturer, our Networking Racks and 19-Inch Subracks are meticulously crafted to meet the highest industry standards, ensuring optimal performance and reliability. Designed with precision and attention to detail, our products offer a robust and efficient solution for housing and organizing electronic components.
-
product
VPX Enclosures
VPX enclosures based on OpenVPX (VITA65) and VPX REDI (VITA48) specifications.
-
product
Enclosures
Explosion Proof and NEMA Enclosure Kits
Available • Explosion Proof • Explosion Proof Large • Enclosure Kit, NEMA 4X, 14x12x8, Fiber Glass, w/Swing Out Door & Window • Enclosure Kit, NEMA 4X, 10x8x6, Fiber Glass, w/Swing Out Door & Window • Enclosure Kit, NEMA 12, 8x6x6, Steel • Enclosure Kit, NEMA 4, 10x8x6, Steel • Enclosure Kit, NEMA 4X, 10x8x6, Fiber Glass, w/Window
-
product
RF Shielded Test Enclosure
JRE 0814
Testing tall devices? The 0814 stands up to any test up to 18 GHz! Featuring a wide swing open door with durable latch handle, this enclosure finds wide use in the WiFi test environment. Two shielded vents provide excellent cooling and optional fan(s) are available for those hot products. Tough 'honeycomb' vents maintain shielding effectiveness throughout the frequency range. Featuring rugged welded aluminum construction, you can be assured of its tight RF shielding effectiveness.
-
product
Enclosure, 25 Module, Large
410112368
The 25 Module Enclosure, Part # 410 112 368 is made of aluminum, painted black and secured to the ITA by eight socket head cap screws (included). It is equivalent in length to the 50 module enclosure with a depth of 6" and handles on each side.
-
product
RF Shielded Test Enclosure, Low Profile
JRE 2214
Like its other brothers in the JRE test line, it features rugged welded aluminum construction with superb RF shielding effectiveness. Long life door gasket material along with double edge engagement not only provides solid RF shielding, but smooth trouble-free operation over its lifespan. Tough 'honeycomb' vent maintains shielding effectiveness throughout the full frequency range. Optional fan is available for additional airflow.
-
product
Dual RF Shielded Test Enclosure
JRE 0814-2R
Containing all the capability of the larger JRE enclosures, the rack mounted 0814-2R is ideal for testing devices with a tall form factor. Two independent 0814 series enclosures are mounted in one 19 inch rack. Two shielded vents provide excellent cooling and optional fan(s) are available for those hot products. Tough 'honeycomb' vents maintain shielding effectiveness throughout the frequency range. Featuring rugged welded aluminum construction, you can be assured of its tight RF shielding effectiveness.
-
product
Adapter Plate, 9050 Enclosure to 9025 ITA
410112422
This Adapter Plate allows a 25 Module ITA to accept standard 50 Module Enclosures.
-
product
Enclosure, 10 Module With 3 Cable Clamps
410112252
This aluminum enclosure is for ITA Part # 410 104 123 and allows your 10 Module Solution to be customized to your needs. The cable clamps are 1" ID. ITA strain relief plates are not needed.
-
product
Absorber Lined Shielding Enclosure Measurements
ALSE
Due to on-going work in the standardization committee CISPR D (responsible for CISPR 25) the latest issue CISPR 25 Ed. 4.0 has not been cited to-date. In the meantime we are able to offer two different validation procedures:
-
product
Wall-Mount Enclosure
Model BOX
Model BOX is a wall-mount / bulkhead enclosure which provides environmental protection to IP65 / NEMA-4X. It comes with a 1/8 DIN panel cutout (45 x 92 mm) and can be used with 1/8 DIN instruments with a depth up to 134.5 mm (5.30"). This includes all 1/8 DIN instruments sold by Laurel Electronics.
-
product
Enclosure, G18, Hinged Cover, 8" Depth
410112668
Enclosure, G18, Hinged Cover, 8" DepthHousing: Material = .06" Aluminum, Finish = Powder Coat BlackCover(s)/Access Panel(s): Material = .12" Aluminum, Finish = Black Anodize
-
product
Compact Anechoic Chambers
If you have mmmwave or THz antenna phased-array that require Over the Air measurements, MilliBox has the equipment and tools that you need. With the help of MilliBox compact anechoic chamber system, you can plot radiation pattern , collect data from those plots, and assess your antenna performance easily and precisely.
-
product
Enclosures
An enclosure is a mechanical item which either partly or wholly surrounds a component or assembly. Enclosure tests determine the suitability of equipment enclosures and sealing design techniques to provide various functions, including the following: Physical and environmental protection to the enclosed items. Protection from items within the enclosure to personnel or objects outside the enclosure.Means for ventilating items within the enclosure. Means for cooling items within the enclosure. Sealing equipment to protect against leakage, both internal and external. Enclosures are designed to provide various degree of protection.
-
product
Enclosure, 50 Module, L-Shaped
410112770
The L-Shaped Enclosure provides significant area for external I/O devices. It features three access panels (front, top and bottom) with removable covers that use 1/4 turn fasteners. The housing is painted black and the access panel covers are black anodized. This enclosure is designed for a 9050VXI ITA, and with the use of adapter plates, can be used with 9050 and 9025 ITA's.
