Filter Results By:
Products
Applications
Manufacturers
Acceleration
rate of change in velocity.
- TEAM SOLUTIONS, INC.
product
Dual-Axis Accelerometer For HS5 & 6 Handyscopes, +/- 2G
TP-ACC20-09
The Accelerometer is a low cost, low power, complete dual-axis accelerometer with signal conditioned voltage outputs. The output signals are analog voltage proportional to acceleration. The Accelerometer is capable of measuring both positive and negative accelerations to at least +/- 2G.
-
product
Tilt Tables
MTG3,MTG5
D.Marchiori (DMA) design and manufacture various models of Tilt Tables which provide very accurate position and motion control for testing and calibrating attitude/heading and inertial reference units. Tilt Tables can be supplied with different diameter support tables. Tilt tables can be controlled either by an internal computer or by an external PC connected via RS232. Tilt Tables are equipped with fast zero position finder. Speed, acceleration and position can be set independently for each axis.
-
product
Crash Simulation Systems
The crash simulators are capable of reproducing a wide range of standardized and user-defined crash tests including advanced applications such as side impact and vehicle pitch simulation. Instron’s acceleration sled systems are used for the development and approval of vehicle safety systems, vehicle parts and also for the investigation of solids and structures during crash events.
-
product
4U AI GPU Edge Server
AXE-7400SR
ADLINK's AI Edge Server AXE-7400SR series can be equipped with various acceleration cards according to application needs. The flexible and diverse combinations can meet the various changes in smart manufacturing applications, including GPU cards, motion control cards, IO cards, and image capture cards. AXE-7400SR features a single 4th Gen Intel® Xeon® Scalable Processor, 8x DDR5 DIMMs at 4800MT/s (8 channels, 1DPC), and supports up to 5x full-height PCIe slots for GPU/FPGA accelerator cards. Additionally, it includes a BMC with AST2600, IPMI v2.0/Redfish compliant, a dust-proof design, and a short chassis, making it suitable for factory and automation environments.
-
product
3.5" Single Board Computer
RSB-4810
Advantech’s RSB-4810 is an Arm-based 3.5" single board computer (SBC) powered by Rockchip RK3568 SOC. It leverages 4 x Arm Cortex-A55 cores, a 1.0 TOPs NPU, and a Mali-G52 graphics engine. RSB-4810 provides USB 3.0, PCIE 3.0, SATA 3.0, 2 x Gigabit Ethernet ports, a single channel LVDS (shared with MIPI-DSI), 6 x UART, and 2 x CAN for embedded applications. RSB-4810 also features Mini-PCIe, M.2 E-Key, and SIM card slot for Wi-Fi 6, BT, 5G/LTE, and AI acceleration modules. These features make Advantech’s RSB-4810 an ideal solution for entry level edge AI computing in AIoT applications.
-
product
Torsional Vibration Analysis System
Torsional vibration analysis is the analysis of the torsional dynamic behavior of a rotating shaft system as a result of forced vibration. Excessive torsional vibration leads to very expensive failures such as damaged shafting, couplings, gears, auxiliary equipment, and more. Repair costs to such equipment can be very expensive. Preventing torsional failures requires adequate analysis over the equipment’s intended range of operating conditions. Jumho Electric torsional vibration analysis system acquires rotary speed signals, calculate the angular velocity fluctuation rate, and therefore obtain various waveforms, angular velocity and acceleration.
-
product
FEC Accelerator Based On Intel® VRAN Dedicated Accelerator ACC100
PCIe-ACC100
ADLINK’s PCIe-ACC100 is a PCIe interface accelerator adapter developed based on Intel's vRAN Dedicated Accelerator ACC100 eASIC chip. It supports 4G and 5G codec acceleration, checksum rate matching, onboard 4G ECC memory, and hybrid automatic repeat request technology (HARQ). The PCIe form factor HHHL (half-height, half-length) can meet the needs of most application scenarios.
-
product
SparkFun Triple Axis Digital Accelerometer Breakout
ADXL313 (Qwiic)
The SparkFun ADXL313 Breakout is a low power, high resolution (up to 13-bits) 3-axis accelerometer for measurement up to ±4g. This breakout measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Digital output data is formatted as 16-bit two's complement and is accessible through the on-board Qwiic connectors (I2C) or SPI.
-
product
Generates Test Cases on ICE
TrekSoC-Si
TrekSoC-Si automatically generates self-verifying C test cases to run on the embedded processors in SoCs in in-circuit emulation (ICE), FPGA prototyping, and production silicon. This verifies your chips more quickly and more thoroughly than hand-written diagnostics or running only production code on the processors. TrekSoC-Si's generated test cases target all aspects of full-SoC verification and work in a variety of different environments. TrekSoC-Si is a companion to TrekSoC, which generates test cases for simulation and acceleration. TrekSoC-Si extends the benefits of TrekSoC into hardware platforms.
-
product
Data Logger MSR165 for Shock and Vibration
MSR165
The robust MSR165 data logger is capable of making 1600 acceleration (shock, vibrations) measurements per second in all three axes. Shock monitoring is possible up to +/- 15g, 32 measurement values are recorded even before the event takes place.
-
product
Jetson Xavier™ NX Edge Inference Platform
DLAP-211-JNX
- Deep learning acceleration with Jetson Xavier™ NX- Compact fanless system 148(W)x120(D)x49.1(H)mm*- Wide temperature range from -20°C to 70°C
-
product
Desktop Network Appliance Platform With Intel® Atom® Processor C2358 And 6 LAN
NA361
The NA361 1U-type compact network appliance platform supports the Intel® Atom™ dual-core processor C2358. Customers using the new NA361 also benefit from Intel® QuickAssist Technology hardware acceleration engine. The network system supports maximum up to 16 GB of DDR3 1600MHz UDIMM non-ECC memory or ECC memory, and features one 2.5” SATA HDD for storage. Six Gigabit Ethernet ports using Intel® i347 and i210 chipsets are integrated into this unit with two-pair LAN bypass function; one PCI Express Mini Card interface is available for wireless network connection. The durable network platform is an excellent choice for VPN, content filtering, UTM, network security gateway, and firewall in SOHO segment.
-
product
Condition Monitoring Solutions
VibroLine
The VibroLine devices are stationary analysis modules for continuous condition monitoring on machines and systems. The VibroLine condition monitoring system can be used to monitor vibration acceleration, speed or displacement with freely adjustable frequency filtering for different applications. Permanent vibration monitoring of your machines not only brings competitive advantages through the increased efficiency of your systems, but also protects against unwanted machine failures. With the VibroLine devices, you can monitor not only the sum, order and storage characteristics, but also impact characteristics. This offers you enormous flexibility in terms of monitoring parameters for your condition monitoring.
-
product
Constant Acceleration Tester-Box Type
KRD30 series
KRD30 series constant acceleration test machine is used to evaluate when components, equipment and other electrical and electronic products are subjected to constant acceleration environment (except gravity), whether the structure adaptability and performance are good, and obtain the units’ electrical parameters.
-
product
SparkFun Triple Axis Accelerometer Breakout
KX132 (Qwiic)
This SparkFun Triple-Axis Accelerometer Breakout is a simple Qwiic breakout for the KX132 digital accelerometer from Kionix. The KX132 is a low-power, 16-bit resolution three-axis accelerometer with four user-selectable acceleration measurement ranges of ±2g/4g/8g/16g and has up to a 10kHz (max) output data rate making it ideal for a wide range of acceleration measurements as well as high-speed applications such as vibration and tap sensing.
-
product
Vibration Meters
Dalian Taijia Technology Co.,Ltd
● Acceleration 10Hz-1KHz 0.1-400m/ms² 0.3-1312ft/ms² 10Hz-10KHz 0.1-400m/ms² 0.3-1312ft/ms²● Velocity 10Hz-1K 0.1-400mm/s 0.004-16.0inch● Displacement 10Hz-1KHz 0.001-4.0mm 0.04-160 mil● Accuracy:＜5%● Auto power off● RPM(revolution):5-100000r/min● Frequency:0.1 to 10KHz● Metric/imperial conversion● With RS232C interface● Max hold● Operating conditions:0-+45℃(32℉-104℉),≤90%RH● Power supply:4x1.5V AAA(UM-4)battery● Battery indicator: low battery indicator● Dimension : 124x62x30mm● Weight: 120g(not including battery)● Optional accessories: RS-232C cable & software:●1.USB adaptor for RS-232C● 2.Bluetooth interface
-
product
Accelerometers
Columbia Research Laboratories
An instrument for measuring acceleration, typically that of an automobile, ship, aircraft, or spacecraft, or that involved in the vibration of a machine, building, or other structure.
-
product
Edge AI Acceleration Modules
Powered by Intel® Movidius™ Myriad X VPU and Intel® OpenVINO™ toolkit, Advantech VEGA-300 series provides compact, low power plug-in modules to help accelerate deep learning inference on the edge for a wide range of AI-based and computer vision vertical applications.
-
product
Special Purpose Instruments
The Mechanical Impedance Sensor simultaneously measures an applied, driving-point force and response acceleration of a test structure for determining parameters such as mechanical mobility and mechanical impedance. The unit consists of a precision, shear mode accelerometer and a quartz force sensor in a common housing. Installation is primarily facilitated at the structural excitation points, in series with a stinger and vibration shaker.
-
product
Mechanical Shock Test System
BW-MST-E5000
The Mechanical Shock Tower develops the kinetic energy electromagnetically. An iron core "bullet" is attracted to the magnetic core of the solenoid by the dense magnetic field that is created as current flows through the field coil of the shock tower. As the bullet is drawn into the center of the magnetic field the acceleration increases exponentially as the gap reduces to zero on impact causing the high impact shock
-
product
3D Acceleration Logger Sensor
NUL-227
This is a 3D (three dimensions) acceleration sensor which displays each dimension one at a time. It allows measuring the acceleration of moving bodies such as a body oscillating in a spring or in a moving vehicle.
-
product
RTX
ROM-3420
ROM-3420 RTX2.0 module integrates an ARM Cortex A9 Dual 1 GHz NXP i.MX6 series ultra low power SoC and I/O solution with Linux. NXP i.MX6 supports 2D, 3D graphics acceleration, and a full HD 1080P video decoding encoding hardware engine. ROM-3420 supports 5V~24V wide range power inputs and a wide temperature design for industrial applications.
-
product
Digital Accelerometer
ZET 7152-N Pro
Digital accelerometer ZET 7152-N Pro is intended for recording of vibrational acceleration and is used as a component of stationary vibration monitoring systems used in technological and industrial spheres of application.
-
product
Acceleration Testing
The acceleration test is performed on a centrifuge to assure that material can structurally withstand the steady state inertia loads that are induced by platform acceleration, deceleration, and maneuver in the service environment, and can function without degradation during and following exposure to these forces. Acceleration tests are also used to assure that material does not become hazardous after exposure to crash loads. The acceleration test method is applicable to material that is installed in mobile platforms such as aircraft, helicopters, aerospace vehicles, air-carried stores, ground-launched missiles, trains, ships, automotive vehicles, etc.
-
-
product
Human Vibration Measurement
Metra Mess- und Frequenztechnik in Radebeul e.K.
For hand-arm vibration measurement according to ISO5349 and ISO / TR 18570, whole-body vibration measurement according to ISO2631 and ship vibrations according to ISO 20283-5 Measurement ranges for acceleration, speed and distance for measuring machine vibrations
-
product
PXIe Measurement Accelerator
M9451A
The M9451A PXIe Measurement Accelerator combined with Option DPD Digital Pre-Distortion & Envelope Tracking Gateware shows what is possible when you combine state of the art FPGA's with Keysight's trusted measurement expertise and PXIe's high speed data handling. As part of Keysight's RF PA/FEM Characterization & Test, Reference Solution, this combination provides unprecedented performance for demanding envelope tracking and digital pre-distortion measurements required for testing modern power amplifiers (PAs) and front-end modules (FEMs). Hardware acceleration provides better than 20x speed improvement over Keysight's previous host-based Reference Solution, with closed/open loop digital pre-distortion (DPD) and envelope tracking (ET) measurements taking just tens of milliseconds and overall measurement times less than 70 ms.
-
product
Sensors: Sensors for Automotive & Industrial Applications
Panasonic is a leading supplier of specialty Sensor technologies offering a wide array of Sensor types including Acceleration, Angular, PIR Motion, Pressure, Temperature and the new Grid-EYE Infrared Array Sensor technology.
-
product
Acceleration Recorders
SnapShock Plus Series
Instrumented Sensor Technology, Inc.
The SnapShock Plus (SSP) series data recorders are compact, battery powered acceleration event recorders. The new generation devices offer several improved capabilities over the standard Snap Shock model
-
product
Shock Test System
Labtone Test Equipment Co., LTD
Products are inevitably affected by impact, bump, free fall, tumbling etc. during production, transportation, loading and unloading as well as during the use of the products. All of these are transient excitation on the object, causing the object to produce mechanical characteristics of high speed, acceleration, strain rate instantly. These kind of characteristics are completely different from that in static load, and may cause problems to the object in terms of structural strength and stability and sometimes the object may fail. Therefore, it's necessary to study the effect of impact and reproduce the shock environment, to assess the structural strenghth and performance of the object under shock environment.
-
product
Network Packet Brokers
NPB
A Network Packet Broker (NPB) is a device that optimizes the flow of traffic between TAP and SPAN connections and network monitoring, security and acceleration tools. By maintaining a many-to-many (M:M) port mapping of network ports to monitoring ports, they can direct network traffic efficiently, and filters can be applied to optimize bandwidth usage on the network. This also means that the performance of out-of-band tools increases as they receive only actionable data.
