Filter Results By:
Products
Applications
Manufacturers
- Virginia Panel Corporation
product
Edge Card Adapter, Universal, for .093 PCB
111107148
VPC provides two types of Edge Card Adapter Kits for 10, 25 and 50 Module ITA Enclosures. Both kits are designed for various sized cards.The Universal Edge Card Adapter Kit’s card guides are hinged and can be folded for storage by releasing the holding latches on either side of the card.
-
product
Defect Inspection System
NovusEdge
The NovusEdge System provides high sensitivity inspection for the edge and backside of bare unpatterned wafers for current and advanced nodes. Multiple modules can be configured on the same automation platform for increased throughput while maintaining a small footprint for an improved cost of ownership.
-
product
Wafer Sorter and Inspection
SolarWIS Platform
Eliminating the opportunity for problematic wafers to enter cell manufacturing lines greatly improves output and yield. ASM AE’s wafer sorter features 3D area inspection capability to inspect wafer thickness, total thickness variation (TTV), saw marks, as well as wafer bow and warpage. SolarWIS also includes modules that can inspect for stain, geometry, micro-cracks, edge chips, resistivity, P or N conductivity and lifetime.
-
product
Wide Measurement Range Model Of Semi-automatic 4 Point Probe Sheet Resistance/resistivity Measurement
RT-3000/RG-2000 (RG-3000)
*User programable measurement pattern & programmable measuring pattern*Tester self-test function, wide measuring range*Thickness, edge, temperature correction for silicon wafer*Film thickness conversion function from sheet resistance*2 types measuring tester (S version: Standard type, H version: High range resistivity measurement type)
-
product
Wafer Edge Profile Measurement
WATOM
WATOM can carry out fully automatic, non-contact measurements of the edge profiles and diameter in accordance with SEMICON standards. A special feature is the system's ability to make measurements of the mark cut into the edge of the wafer to indicate the crystal orientation. Because of its high measurement accuracy of less than 1.5 µm, leading wafer manufacturers across the world use WATOM for shop-floor geometrical quality control.
-
product
WATOM
Wafer edge and notch profile measurementThe use of smaller and smaller patterns in the semiconductor industry calls for increasingly advanced materials of extremely high quality. In response to the steady improvements in the quality of wafers, KoCoS Automation has developed WATOM, a wafer edge and notch profile measurement tool which heralds a new era of extremely precise wafer geometry measurement.WATOM supports quality assurance throughout the wafer manufacturing process, starting at the very beginning and continuing on through to wafer reclaim.The WATOM Edge and Notch Wafer Geometry Analyser sets the worldwide benchmark for the quality assurance of geometrical measurements in semiconductor wafer manufacturing, combining the highest quality standards with top-class service. These high-precision, laser-based edge profile measurement tools are specially designed for optimum integration in manufacturing lines within the semiconductor industry.
-
product
Automated High-Resolution AOI Tool Modular Inspections
LIGHTiX
Next generation macro inspection system (AOI).• All-side wafer inspection: Front, back and edge inspection.• 100% defect images without throughput impact.• Integrated high-end microscope review.• True Color Inspection (TCI) technology.• Advanced CD, 2D/3D, OVL and EBR metrology.• Automatic defect classification• Best in class cost of ownership for high resolution AOI• High-speed patterned wafer inspection• High defect sensitivity• ISO Class 1 certified• Tool – to – tool matching
-
product
Edge Grinding Machines
The requirement for the wafer quality is getting higher and the condition of wafer edge is getting more important. The edge grinders “W-GM series” process edge grinding of various kind of materials such as Silicon, sapphire and SiC.As a solution for that, Our W-GM series are highly rated among manufactures of silicon, compound materials and other wafer shaped materials. Wafer edge grinding machine also draws the attention as a solution for the yield loss due to the knife edge of device wafer in the back end process. In the semiconductor manufacturing process, from the wafer manufacturing to the device manufacturing, the quality improvement of wafer edge is necessary in recent years.We make proposals that achieve the improvement of quality, CoO and yield with our machine.
-
product
Laser Type Edge Detection Sensor
LD
Panasonic Industrial Devices Sales Company of America
The Panasonic LD Series Laser Type Edge Detection Sensor can easily measure the outer diameter of objects. It can also sense inclines, detect the notch of a wafer and judge the height of small objects.
-
product
Defect Inspection and Review
KLA’s defect inspection and review systems cover the full range of yield applications within the chip and wafer manufacturing environments, including incoming process tool qualification, wafer qualification, research and development, and tool, process and line monitoring. Patterned and unpatterned wafer defect inspection and review systems find, identify and classify particles and pattern defects on the front surface, back surface and edge of the wafer. This information allows engineers to detect, resolve and monitor critical yield excursions, resulting in faster yield ramp and higher production yield.
-
product
Defect Inspection Module
EB40
The Class 1 certified E40 and B40 modules (available separately or combined in one module) can automatically detect defects on the entire edge, from zone 1 to 5, and the entire backside. The ability to inspect the entire backside allows for faster root-cause analysis of zone 5 defects since such defects can migrate from the wafer interior.
-
product
1000 BASE-T1 Ethernet
MECS-6110
- 1x Intel® Xeon® D-2100 family processor- 4x DDR4-2666 1DPC RDIMM ECC REG up to 256GB- 2x 2.5” SATA bays and 2x M.2 M Key interfaces- 420mm depth 1U 19” rackmount form factor- Built-in Intel® QAT support- TPM 1.2/2.0 modul- 2x IEEE 1588 v2 1PPS/TOD RJ-45 port and 4x 1PPS SMA input/output Specifications- Verified for Intel® Select Solution for uCPE on CentOS
-
product
1U 19” Edge Computing Platform with Intel® Xeon® D Processor
MECS-6120
- 1x Intel® Xeon® D-17XX Series family processor- 3x DDR4-2666 RDIMM ECC REG up to 192GB- 2x 2.5” SATA bays and 2x M.2 M Key interfaces- 420mm depth 1U 19” rackmount form factor- Built-in Intel® QAT: SSL (20G), Compression (15G)- Intel® eASIC by card for FEC acceleration- EMC grade: Class B & Advanced chassis management, IPMI v2.0 compliant
-
product
Surface Charge and Zeta Potential
Surface analysis is a vital method for qualifying new materials in technical and biological applications. Surface charge analysis empowers users to closely monitor the surface chemistry from small particles in the nanometer range up to large wafers. Gain insights into modifications resulting from surface treatment and surface interactions with natural environments under near-ambient conditions. Get a competitive edge in optimizing existing products and developing new ones using the Anton Paar instruments which offer zeta potential measurement for a wide range of applications.
-
product
Wafer Probers
Full Automatic Wafer Prober. Semi Automatic Wafer Prober. High Current Probe Block. 6-inch Manual Prober. 8-inch Manual Prober. 12-inch Manual Prober.
-
product
Edge Gateway
EPC-R4760
EPC-R4760 is an ARM based Box Computer powered by Qualcomm ARM® Cortex®-A53 APQ8016 processor that supports full HD display and intergrades on board wireless solution – Wi-Fi, BT and GPS. EPC-R4760 also features in mini PCIe, M.2, and SIM card slots for expanding connectivity capability, like 3G, 4G/LTE modules. Equipped with complete Android, Linux and Win10 IoT core BSPs, this box computer enables customers to easily develop unique application on specific OS.
-
product
Wafer Prober
Prexa MS
The latest fully automated 300mm wafer prober for memory devices. Featuring high rigidity and exceptional thermal control, the system enables full-wafer contact testing.
-
product
Wafer Chucks
American Probe & Technologies, Inc.
High Performance Chuck for your needs Introducing the American Probe & Technologies’ HC-6000 series of thermal chucks,
-
product
Wafer Tester
Tokyo Electronics Trading Co., Ltd.
A vital step in the Semiconductor Value Stream, focusing on electrical screening and consumption of Known Good Die (KGD).
-
product
Wafer Bonder
AML
Wafer bonding has found many applications in the field of MST, MEMS and micro engineering. These include the fabrication of pressure sensors, accelerometers, micro-pumps and other fluid handling devices. The process is also used for first-order packaging of silicon microstructures to isolate package-induced stresses. The OAI AML Wafer Bonder facilitates both the alignment and bonding to be performed in-situ, in a high vacuum chamber. For anodic bonding the wafers are loaded cold and heated in the process chamber. For high accuracy alignment the wafers are aligned and brought into contact only after the process temperature has been reached, thus avoiding differential thermal expansion effects which can compromise alignment. The AML Wafer Bonder is excellent for anodic bonding, silicon direct and thermal compression bonding applications. These features enable the bonder to be used with virtually any processing tool.
-
product
360° Edge Analytics
360° Edge Analytics fills the gap between location data and the individual business application. The Location Data Analytics technology leverages precise position data augmented by application context information to gain business insights from complex processes. Assessment, optimization as well as process restructuring will be possible with nanotron’s complete solutions based on its Location-Aware IoT Platform with Location Data Analytics.
-
product
GPU Edge Computers
AI workstations with GPU computing power are systems designed for industrial image analytic applications e.g. AOI, and medical image applications.
-
product
Edge Radius Measurement
EDGEINSPECT
NOVACAMTM EDGEINSPECTTM system is a modular, non-contact 3D metrology system that:Measures, down to the micron, any type of edge: cutting edges, inside or outside edges, edges on round holes, straight edges, etc.
-
product
Edge Gateway
EPC-R4680
EPC-R4680 is an ARM based Box Computer powered by Rockchip ARM Cortex-A17 RK3288 Quad core high performance processor, which supports 4K display and 4Kx2K multiformat video decoding via HDMI. It also features M.2, Mini-PCIe and SIM card slots for WIFI, BT and 4G connectivity. EPC-R4680 also offers rich interfaces such as 6 USB2.0, 6 UART, 1 GbE and 8 GPIO. It is an ideal solution for Kiosk, Vending machine and Digital signage application.
-
product
CODESYS-Ready Edge Controller
AMAX-600 series are PC-Based edge controllers powered by CODESYS, the software PLC control kernel with Industrial Ethernet for OT applications.
-
product
Wafer Prober
Precio XL
Fully automated 300mm wafer prober. The system achieves high productivity, excellent contact performance, improved cleanliness, and short lead time, and offers a number of high value-added functions as options.
-
-
product
Wafer Test
Based on the reliability test, CSE conducts the test of the IC chip through electrical signals to the semiconductor wafer. We provide various Test Solutions according to the needs of designers/manufacturers. by sorting out good and bad products.
-
product
Azure SQL Edge
Bring the security and performance of the Microsoft SQL engine to the edge with Azure SQL Edge running on ARM64 and x64 architecture. This productivity tool for edge computing combines new capabilities such as data streaming and time series with in-database machine learning and graph features. Develop your application once and deploy anywhere across the edge, your datacenter, and Azure. Get the Microsoft SQL database engine optimized for the edge for as low as USD60 per device.
-
-
product
Silicon & Compound Wafers
Compound semiconductors are undergoing a major expansion addressing many new applications and using various materials such as SiC, GaN, GaAs and others, to improve the performance of new devices in several segments such as Power and Face Recognition.
